Адаптеры (HBA) Fibre Channel Emulex LP982

The LP982 PCI-X host bus adapter offers a highly integrated 2Gb/s Fibre Channel HBA for use in servers based on either PCI or the latest PCI-X expansion bus. The LP982 delivers exceptional performance through the use of an Emulex Pegasus ASIC, a 266MIPs onboard processor, an embedded 1Gig/2Gig SERDES, and a high performance unified QDR SRAM. The LP982 features automatic topology detection and automatic speed negotiation capability. These capabilities allow complete compatibility with existing 1Gb/s Fibre Channel SANs, while allowing seamless upgrades to higher speed 2Gb/s SANs.

STANDARDS

• ANSI Fibre Channel FC-FS
• ANSI Fibre Channel FC-PH
• ANSI Fibre Channel FC-PI
• ANSI Fibre Channel FC-AL
• ANSI Fibre Channel FC-PLDA
• ANSI Fibre Channel FC-MI
• ANSI Fibre Channel FC-FLA
• PCI-X 1.0a
• PCI local bus revision 2.2 (see power requirements)
• Fibre Channel Class 2, 3
• PHP hot plug - hot swap

ARCHITECTURE

• Emulex Pegasus ASIC technology up to 133MHz PCI-X DMA
• 2Gb/s or 1Gb/s FC Link
• 2MB FLASH memory
• 1MB QDR SRAM

SOFTWARE ENVIRONMENTS

• Windows Server 2003
• Windows 2000
• Windows NT
• Linux
• NetWare

HARDWARE ENVIRONMENTS

• x86, PCI hardware platforms
• 3.3V signaling, 5V tolerant
• 32/64b 33/66MHz PCI
• 66/100/133MHz PCI-X

OPTICAL

• data rates: 1.0625/2.125Gb/s
• optics: short wave laser
• cable: 50/125μm multi-mode fiber & 62.5/125μm multi-mode fiber
• connector: LC
• distance:
  (1Gb/s)
  500 meters (1,640') 50/125 μm fiber
  300 meters (984') 62.5/125 μm fiber
  (2Gb/s)
  300 meters (984') 50/125 μm fiber
  150 meters (492') 62.5/125 μm fiber

PHYSICAL DIMENSIONS

• short low profile MD2 form factor
• low profile or standard bracket
• 167.64mm x 64.42mm (6.60" x 2.54")

POWER REQUIREMENTS

• Volts: +3.3 VDC (± 5%)
• Power: 7.7 watts @ 66MHz, 8.5 watts @ 133MHz (typ)

ENVIRONMENTAL CONDITIONS

• Operating temperature: 0° to 45°C (32° to 113°F)
• Airflow required: 100 lf/m
• Storage temperature: -40° to 70°C (-40° to 158°F)
• Relative humidity: 5% to 95% non-condensing

AGENCY APPROVALS

• Class 1 Laser Product per DHHS 21CFR (J) & EN60825
• UL recognized to UL 1950
• CUR recognized to CSA22.2, No. 950
• TUV certified to EN60950
• FCC rules, Part 15, Class A
• ICES-003, Class A
• EMC Directive 89/336/EEC (CE Mark)
  • EN55022, Class A
  • EN55024
• Australian EMC Framework (C-Tick Mark)
  • AS/NZS 3548, Class A
• VCCI, Class A

DRIVER SUPPORT

A rich suite of software complements the LP982. Some examples of the features included are, LUN Masking, LUN Mapping, Persistent Binding, I/O Coalescing, full fabric boot as well as support for multi or simultaneous protocol (SCSI & IP) operation. In addition, most drivers include a full-featured implementation of the FC-MI HBA Management Interface. These features enable advanced storage area network (SAN) implementations in Windows Server 2003, Windows 2000, Windows NT, Linux, and NetWare environments. All drivers are also fully compatible with the Emulex LP10000, LP9002L, LP850, LP8000, LP7000E, LP952L, LP9402DC, LP9002C, LP1050 and LP9802 host bus adapters.

ORDERING INFORMATION

LP982-F2 embedded multi-mode optic interface (LC)